BEECH » 60
First introduced in July of 1968, the Beechcraft 60 Duke is a twin-engine, fixed-wing light aircraft with retractable tricycle landing gear as well as a pressurized cabin. Originally made with turbocharged Lycoming TIO541-B4 engines that develop 380 hp each, the Beech 60 has always been known as a high performing aircraft.
Upon its introduction in the 1970’s, the Beech 60 Duke was comparatively advanced in terms of it’s complicated technology, and even though the final variant introduced in 1974, the B60, was an improvement in engine efficiency, there were only a total of 596 produced by Beechcraft and production was stopped in 1983. Despite the fact that maintenance costs were relatively high for this high performing aircraft, most of the Beech B-60’s have retained their original equipment.
In addition, there have been a number of Beech 60 Duke’s modified by replacing the Lycoming reciprocating engines with Pratt & Whitney Canada PT6A-21, or -35 turbine engines, which have increased both the fuel capacity and the maximum useful load.
So if you are the proud owner or certified technician working on a Beechcraft 60 Duke, and are in need of the highest quality exhaust parts for your aircraft, then Knisley Welding is exactly the place to find them. In addition to the extensive list of FAA/PMA approved parts for various aircraft models, Knisley Welding also provides the following exhaust parts for the Beech Model 18 H/E aircraft:
1 K77429 Right Hand Elbow
2 K77943 Right Hand Stack
3 K77434 Left Hand Elbow
4 K77944 Left Hand Stack
5 K77430 Right Rear Adapter
6 K60-950024-13 TailpipeExhaust
*all of the above exhaust parts are approved by the Aviation authority for modification, and Knisley Welding protects new and overhaul exhaust parts against workmanship defects under conditions of ordinary use, for a service period of one year with no limit to the amount of hours that the part in question has been used.