BEECH » 58P/58TC

First introduced in 1961, the Beechcraft Baron is a lightweight twin-engined piston, civil utility aircraft. Originally developed from the Beechcraft 95 Travel Air, the Beech Baron simply replaced the Travel Air's tail with that of the Beechcraft Debonair, in addition to streamlining the engine nacelles and adding six-cylinder engines.

The 58 variant of this aircraft was introduced in 1969 and in addition to being much more powerful than the Baron 55, the Beech 58 is equipped with club seating, double aft baggage doors, and an increased weight of 5,400 lbs. Depending on the variant, the Baron 58 comes equipped with either the Continental IO-520 or IO-550 300 horsepower engine. The Baron 58 also boats a longer fuselage, which not only increased the rear baggage space, but also more comfortable seating than the Baron 55.

Now the turbocharged Baron 58TC and the pressurized Baron 58P werent introduced until 1976. These variants were powered by turbocharged Continental TIO-520 engines with 310325 horsepower, and an increased gross weight of 61006200 lbs, making both the Baron 58P and 58TC models capable of cruising at 200 knots at 8000 ft, and 220 knots at 20,000 ft, respectively.

In addition to the extensive list of FAA/PMA approved parts for various aircraft models, Knisley Welding also provides the following exhaust parts for the Beech 58P/58TC Model aircraft: 

1 K6407-67 Left Hand Elbow

2 K6407-66 Left Hand Flange

3 K6407-11 Right Hand Flange

4 K6407-10 Right Hand Elbow

5 K6407-02 Right Hand Stack

6 K6407-01 Left Hand Stack

7 640712 Header

8 K102-950001-9 Tailpipe

BEECH 58P/58TC Exhaust
Exhaust

*all of the above exhaust parts are approved by the Aviation authority for modification, and Knisley Welding protects new and overhaul exhaust parts against workmanship defects under conditions of ordinary use, for a service period of one year with no limit to the amount of hours that the part in question has been used.